郑重声明
2026-09-072026-09-03
博思特POSITAL IXARC 多圈 KIT编码器
POSITAL IXARC 多圈KIT编码器BiSS C with Preset 接口, 实心轴 结构.
接口 BiSS C with Preset
手动功能 Preset via cable or connector
接口周期时间 ≥ 50 µs
诊断 Error and Warning Bits, Register Values
编程功能
Via config pin: Wiegand sensor test, preset value and
multiturn reinitialization, resolution programmable
Housing Remark 向后兼容KCD
输出驱动器 RS422
接口 PCB Connector, male, JST-GH
电源电压 4.75 – 15 VDC
功耗 Typical 32 mA, max 35 mA @5V DC
功耗 ≤ 0.3 W
启动时间 < 100 ms
时钟输入 RS422
时钟速度 80 kHz - 10 MHz
反极性保护 是
短路保护 是
EMC:发射干扰
The kit encoder is a sub-assembly and not to be
considered an independent system. Therefore,
compliance with CE requirements has to be ensured
by the integrator for the overall set-up.
允许最高转速 12000 1/min
EMC:抗干扰 The kit encoder is a sub-assembly and not to be
considered an independent system. Therefore,
compliance with CE requirements has to be ensured
by the integrator for the overall set-up.
MTTF 20 years @ 105 °C
技术 Magnetic TMR
单圈分辨率 Pre-programmed 17 bit
分辨率 多圈 Pre-programmed 16 bit
精度(INL) ±0.0878° (≤12 bit) measured after calibration at room temp.
认证 认证/寿命 码制 码 二进制码
外壳防护等级(外壳) IP30
Min Temperature - 40 °C (- 40 °F)
Max Temperature +105 °C (221 °F)
顶部屏蔽 预装
外壳材料 钢
外壳涂层 e-coating (KTL) + Powder coating
轴类型 实心轴
轴的材料 Stainless Steel V4A (1.4404, 316L)
轴紧固选项 轴上外螺纹
耐冲击性 ≤ 200 g (half sine 6 ms, EN 60068-2-27)
持久的抗冲击性 ≤ 20 g (half sine 16 ms, EN 60068-2-29)
耐振动性 ≤ 30 g (10 Hz – 1000 Hz, EN 60068-2-6)
更多型号、参数及尺寸，请联系我们的销售工程师。
